Study at a glance

In 19 multidirectional team sport athletes performing maximal decelerations from three approach speeds, Theia3D-based markerless motion capture combined with force plate data identified distinct, step-specific kinematic strategies underlying effective deceleration, with the first braking step relying on greater hip and knee flexion and later steps relying more on optimized touchdown posture.

Summary

Disclaimer: The following summary details independent academic research. Theia3D is intended for research, sports performance and educational use only. It is not cleared as a medical device and is not intended to be used for the diagnosis, treatment, mitigation or prevention of any disease, injury or medical condition.

Editor's note: The paper does not report a specific Theia3D software version number. Here, Theia3D served as the motion-capture tool for a research question about step-specific deceleration mechanics, rather than as a system being validated against marker-based motion capture within this particular study; the authors note that validation of Theia3D during high-intensity deceleration tasks specifically remains limited, and recommend that comparisons of absolute kinematic values across different motion-capture systems be made cautiously.

Study Overview

Design

A cross-sectional biomechanical study examining the step-specific external kinetic determinants and underlying kinematic strategies of early horizontal deceleration ability across three approach speeds in multidirectional team sport athletes.

Participants

Nineteen trained multidirectional team sport athletes (14 men, 5 women; age 20 years; height 1.77 m; mass 80 kg), free of lower-limb trauma for at least six months and trained and competing in sports such as football, rugby, or hockey for an average of five hours per week.

Data Collection

After a standardized warm-up, participants accelerated over 20 meters from a standing start before performing a maximal horizontal deceleration across four ground-embedded force platforms, completing 15 successful trials at three target approach speeds (100%, 85%, and 70% of each participant's maximal sprint velocity, five trials per speed). Markerless three-dimensional kinematic data were recorded using eight high-resolution Vicon Vue video cameras (100 Hz) processed through Theia3D, synchronized with force platform data (1000 Hz) recorded across the first three deceleration steps.

Analysis

Sagittal-plane hip and knee joint angles, shank inclination, center-of-mass height, and center-of-mass-to-center-of-pressure distance were extracted for each of the first three deceleration steps using Visual3D. Horizontal and vertical ground reaction force variables, including mean horizontal ground reaction force and the horizontal-to-vertical force ratio, were calculated for each step. Relationships between kinetic and kinematic variables were assessed using correlation analysis, with multiple linear regression used to identify the strongest step-specific predictors of early deceleration ability across all three approach speeds.

Key Findings

  • Greater mean horizontal ground reaction force and a greater horizontal-to-vertical force ratio were associated with greater within-step deceleration across all speeds and steps, with mean horizontal ground reaction force in step 1 and horizontal-to-vertical force ratio in step 3 emerging as the strongest overall predictors of early deceleration ability.
  • In the first deceleration step, greater peak hip and knee flexion were significantly associated with producing greater horizontal force and a more favorable horizontal-to-vertical force ratio across all approach speeds, consistent with the greater momentum an athlete still carries exiting high-speed running at this point.
  • In the second and third steps, a lower center-of-mass height, a greater distance between the center of mass and center of pressure (reflecting more anterior foot placement), and a more forward-leaning shank at touchdown were significantly associated with greater horizontal force production, with these relationships generally stronger at slower approach speeds.
  • Submaximal approach speeds (70% and 85% of maximal) still produced substantial peak vertical ground reaction forces and horizontal force demands, indicating that even decelerations performed well below top speed impose considerable mechanical loads on the body.
  • The authors conclude that early horizontal deceleration ability is underpinned by distinct, step-specific kinetic and kinematic strategies, with the first step relying primarily on hip and knee flexion and later steps relying more on optimized touchdown posture, supporting the design of step-specific deceleration training.

What This Means for Movement Science Researchers and Multidirectional Sports Performance Teams

For researchers and performance staff working with multidirectional team sport athletes, this study offers a specific, practically actionable framework for deceleration coaching: because the biomechanical demands of each braking step differ, training interventions can be targeted step by step rather than treated as one generic deceleration skill. The findings suggest that coaching greater hip and knee flexion during the initial braking step, and coaching optimized touchdown postures (a lower center of mass, more anterior foot placement, and a more forward-leaning shank) during later steps, could each address the specific mechanical demands most relevant at that point in the deceleration sequence. The finding that submaximal-speed decelerations still impose substantial mechanical demands also offers a practical training note: athletes should be prepared for meaningful braking loads across a full range of approach speeds, not only maximal-speed scenarios, when building deceleration-specific conditioning programs.

The Role of Theia3D in Movement Analysis

Theia3D served as the markerless motion-capture tool in this study, enabling detailed joint kinematic measurement across a fast, high-force braking sequence synchronized with force platform data. The authors note that validations of Theia3D specifically for high-intensity deceleration tasks remain limited compared to more established movements like walking, running, and change of direction, and recommend caution when directly comparing absolute kinematic values from this study to those reported using other motion-capture systems. They also note that the rapid limb accelerations and increased soft-tissue movement associated with deceleration tasks may limit the accuracy of marker-based motion capture specifically during these movements, a consideration relevant to interpreting comparisons between motion-capture technologies for this kind of high-intensity task.

Study Limitations and Future Directions

The authors note that the deceleration task used in this study was pre-planned, giving participants time to prepare their braking strategy in advance, which may not fully reflect the biomechanical demands of the reactive, unplanned decelerations more commonly required in actual multidirectional team sport play. The analysis focused on the first three steps of the deceleration sequence, representing early deceleration ability, while a full braking sequence in high-approach-speed decelerations can involve up to six steps, so these findings may not generalize to the later portion of the sequence. The study examined external kinetics and kinematics only, without assessing internal joint-level mechanics or tissue-level forces, limiting what can be concluded about the underlying loading mechanisms involved. The authors identify examining whether the kinetic and kinematic determinants identified here hold under more reactive, ecologically valid conditions, capturing the full braking sequence beyond the first three steps, and assessing joint-level mechanics and tissue-level forces as important next steps for future research.

Citation: Hitchens, L., & Verheul, J. (2026). Early horizontal deceleration ability across multiple steps and approach speeds in multidirectional team sport athletes. European Journal of Sport Science, 26, e70224. https://doi.org/10.1002/ejsc.70224

Link: Read the full study

What Biomechanical Strategies Underlie Effective Deceleration in Team Sport Athletes?

This study of 19 multidirectional team sport athletes uses Theia3D markerless motion capture to show that effective horizontal deceleration relies on distinct, step-specific strategies, greater hip and knee flexion in the first braking step and optimized touchdown posture in later steps, even at submaximal approach speeds. If your work involves multidirectional sports performance or deceleration training research, talk to our team about applying Theia3D to your own studies.

Recent Posts